Reporting

What is average position in Google Search Console? How it's worked out

Average position is the mean of your topmost spot in Google for every impression. How it's calculated, why it moves, and how to read it by query.

// in this article

Average position in Google Search Console is the average of the highest spot your site held in Google’s results, counted once for every impression, where 1 is the top of the page. A lower number is better, but it’s a blend of many searches, so a sitewide figure of 14 doesn’t mean any one page sits at 14.

That’s the whole definition. The useful part is knowing what goes into the average, because most of the confusing moves in the chart come from the mix of searches changing, not from your rankings. Everything below comes from Google’s own notes on how impressions, position and clicks are counted and its Performance report help, checked in November 2026.

How Google works out the number

Three rules decide the figure:

  1. Only your topmost result counts. If your site shows up three times for one search, at positions 2, 4 and 6, Google records 2 for that search.
  2. A position is only recorded with an impression. If your page sits on page 3 and the searcher never gets past page 1, nothing is recorded. That’s why a query can show a dash instead of a number.
  3. The average is weighted by impressions. Google’s help describes it as averaging “the position value for all impressions.” Its BigQuery export docs spell out the sum: total the topmost position for every impression, divide by impressions, then add 1 (the raw data counts the top spot as 0).

The third rule is the one people miss. A query you appear for 900 times moves the average far more than a query you appear for 10 times.

lawn care raleigh
impressions: 900
topmost position: 4
adds 900 x 4 = 3,600
sod installation cost
impressions: 100
topmost position: 31
adds 100 x 31 = 3,100
Average position
6,700 / 1,000 impressions
= 6.7
a plain average of 4 and 31 would say 17.5
fig 1 · how two queries for a made-up raleigh landscaper turn into one average. Illustrative, not measured data.

What counts as one position

Google numbers the results from top to bottom down the main column, then down the side column. Each block on the page takes one position, however many links it holds. A few cases matter for small business sites:

  • AI Overviews take one position. Every link inside the overview gets that same position. A page cited in an AI Overview at the top can show a position near 1 even when its blue link is far lower. Our AI Overviews tracker guide covers how to see those citations.
  • Featured snippets typically take position 1.
  • Carousels take one position, and all items in them share it, as long as the items link to websites. A carousel of links that only run a new Google search takes no position at all.
  • Ads don’t take a position. Four ads above you don’t push your organic result from 1 to 5.

Position is only calculated for Google Search results. Discover has no position, and image search counts left to right, then down, so a position of 11 there can mean the second or third row of images. Google’s own help warns that “a position number can mean different things in different situations.”

when to aerate lawn in north carolina
sponsored · no position Lawn aeration service · Book online
position 1 AI Overview Cites 3 sites. All three links are recorded at position 1.
position 2 Blue link · state extension service guide
no position People also search for · links that run new searches
position 3 Blue link · your aeration page
fig 2 · a simplified made-up results page with the positions search console would record, based on google's counting rules

Why it moves when your rankings didn’t

Because the number is weighted by impressions, anything that changes which searches you appear in changes the average. The common causes:

  • You started showing for new, lower queries. A new blog post that appears at position 45 for a few hundred long searches drags the sitewide average up (worse), even though clicks rise. This is growth that looks like a drop.
  • A strong query got more searches. Seasonal demand for a query where you rank well pulls the average down (better) without any ranking change.
  • The date range or filters changed. Mobile and desktop, countries and search types each have their own mix. Compare like with like.
  • The chart and the table count differently. The chart is the topmost result from your whole site. The table, when grouped by page, gives each page its own position, so one search can count for two of your pages at once. Google’s help notes the totals can differ for this reason.
✕ What the chart seems to say
average position: 9.8 to 16.2
"we dropped six places"
someone asks what broke
✓ What happened
new sod guide: 2,400 impressions at 38
"lawn care raleigh": still position 4
clicks up from 310 to 365
fig 3 · the same made-up month read from the sitewide chart and from the queries behind it. Illustrative, not measured data.

Read it by query and page instead

The sitewide figure is close to useless on its own. Position becomes useful when you tie it to one query, or one query on one page:

  1. In Search Console, open Performance, then Search results.
  2. Turn on Average position at the top of the chart, along with clicks and impressions.
  3. Open the Queries tab and sort by impressions. The position column now belongs to each query.
  4. Click a query you care about, then open the Pages tab to see which of your pages Google showed for it.
  5. Set the date range to the last 3 months and use Compare against the previous period to see whether that query moved.

The step that matters most is the fourth. If two of your pages share one query, neither may rank as well as one clear page would. That’s often a sign to merge them or make one more specific.

Once you have positions per query, the ones between about 8 and 20 with steady impressions are the easiest wins: Google already sees you as relevant. Our guide to competitive keyword research shows how to compare those pages with the ones above you. For client reports, the SEO reporting template explains why named queries beat a sitewide average.

When your own search shows a different spot

Google’s help answers this one directly: the report shows an average across all searches, and your own search depends on your location, search history and device. A landscaper checking from the office in Raleigh will see different local results from a customer in Cary. If you need a spot check, use a private window and a rank tracker set to the right city, and treat it as one sample, not the truth. If you’re unsure what Search Console measures compared with Analytics, see Search Console vs Google Analytics.

FAQ

What is a good average position in Search Console?

There’s no single good number, because it depends on which queries you show for. For one query that matters to your business, a position from 1 to 3 usually means you’re near the top of page one. A sitewide average is better judged by its trend alongside clicks.

Why does average position show a dash?

A dash means no position was recorded, because your site got no impressions for that row. Google’s example is comparing devices: a page with impressions on desktop and none on mobile shows a number for desktop and a dash for mobile. Exports show those values as zero.

Does average position include AI Overviews?

Yes, for Web search. Google’s counting rules say an AI Overview occupies a single position and every link inside it gets that position. Google’s AI features guide says this traffic is counted inside the Web search type with the rest of your results, so a citation can lift a page’s average without the report pointing it out.

Pick five queries and watch those

Write down the five queries that bring you customers, note each one’s average position and impressions for the last 3 months, and check the same five each month. If a position slips and impressions hold, look at the page. If impressions change, look at demand first. The sitewide average can stay on the chart, but don’t make decisions from it.

Portrait of Liam Fraser
// written byLiam FraserSEO specialist with 3 years of experience. Liam writes about what works in local, technical and AI search.About SerpSurfers →